Ener-Save Sdn Bhd

ENER-SAVE SDN. BHD. (661220-A)

find more information at www.ener-save.biz

Portable Combustible Gas Leak Detector & Pressure Gauge

As dependable and efficient as a good hunting dog, the Gas Pup does the job of two monitors in one ultra-compact tool. Employing easy-to-use automatic calibration and a single catalytic bead sensor, this state-of-the air instrument not only sniffs out gas leaks, but also measures pressure.

Product Information

Features & Benefits

Built-in 0 to 99 psig Pressure Gauge: One less tool to bring to the worksite
Autoranging Natural Gas Detection: No need for operator to turn a knob and wait for a new zero if over-range occurs
Autozero Upon Start-Up: No operator intervention required for sensor zero
Built-In Auto-Calibration Function: Allows fast and simple instrument calibration at the bench or in the field
Small Size and Light Weight: Both natural gas detection and pressure measurement in one 22 oz package
Rugged Aluminum Case with Built-In Rubber Boot: Built to withstand the unexpected bumps and falls which go along with field use
Bar Graph Display in both the ppm and the upper % gas Natural Gas Ranges: Bar graph allows visual determination of the point of highest gas concentration when used to find leaks
“Sticky” Bar Graph Display in High Gas Range: Useful in bar holing to “hold” the highest reading - indicates where an underground leak is located
One Sensor for All Three Ranges of Natural Gas Detection: Fewer spare parts required means lower operating costs

Specifications

Ranges:
- Natural Gas Detection:
  - 0-2,500 ppm
  - 0.2-5.0% vol. gas
  - 0-99% vol. gas
- Pressure:
  - High 0-99 psig
  - Low ±9.9 psig referenced to atmospheric pressure
  - Delta ±9.9 psig from any reference pressure point between 0 and 99 psig
Accuracy:
- Natural Gas:
  - Low Range ±0.3% gas
  - High Range ±3% gas
- Pressure ±5% of reading
Warm Up Time: 1 minute approx.
Response Time:
- Natural Gas <15 seconds
- Pressure <5 seconds
Environmental Conditions: -4 to +122°F (-20 to +50°C), 10 to 95% Relative Humidity (non-condensing)
Size: 4.7 x 2.3 x 3.7 in. (11.9 x 5.8 x 9.4 cm)
Weight: 22 oz (625 g)
Batteries: 3 - AA alkaline
Battery Life: Typically 6 to 8 hours of continuous operation, and well over a week of operation when used from 50 to 60 minutes a day
Agency Approvals: MET lab certified to UL913 and CSA C22.2-157, intrinsically safe for use in Class I, Division 1, Groups A, B, C & D hazardous areas
Warranty: 1 year, including sensor

Ordering Information

Part Number	Description
55-8000	Gas Pup with Hand-Held Gas Probe and Pressure Hose
55-3001	30" Plastic Bar Hole Probe
3474-1210	30" Aluminum Bar Hole Probe
3474-1110	30" Fiberglass Bar Hole Probe
55-0038	Pressure Hose Assembly with 1/8" Quick Disconnect Socket
55-0072	Service Line Pressure Testing Kit: Includes tubing, tee fitting with tire-valve port, quick connect fittings, and 1/8" NPT socket
55-0044	Soft Carrying Case with Shoulder Strap
55-0039	Hard ABS Plastic Carrying Case
55-8002	Calibration Kit (gas not included)
51-1121	Calibration Gas, 2.5% Methane in Air, 103 L
55-0060	Calibration Gas, 100% Methane, 58 L
51-1816	Calibration Gas, 500 ppm Methane in Air, 103L
51-7131	Calibration Gas, 20.9% O2 in Air, 103L
103-5386	Quick Connect Socket, 1/4" NPT
103-5396	Quick Connect Socket, 1/8" NPT
55-0040	Gas Sensor
55-0045	Inlet Filter, for instrument (package of 2)
5500-7100	Foam Filters, for probe (box of 10)
5500-7400	Charcoal Filters, for probe (box of 10)
55-0063	Water Trap / Filter Assembly
07-1644	Replacement Filter for Water Trap/Filter Assembly (package of 3)

Back to Products

Authorised Distributor for the Products of: EARTH

One Stop Electrical Energy Savings System- Air Conditioners, ACPUs, WCPUs, Chillers, Injection Moulding Machines, Blowers/Fans, Fluorescent Light, Street Light, High Bay Light, High-Mast, Pumps, Air Compressors, Power Quality/ Efficient